First time Use
It is recommended to charge your Scanmarker Air for 2.5 hours before first-time use (when connecting via Bluetooth).
Charging
- Charge via computer using the USB cable provided or use a USB charger.
- The green light on your scanner will blink slowly whilst battery is charging and will turn steady when it has reached a full charge.
- When the battery is very low the green light will start blinking fast, indicating that recharge is required.
Battery Life
The battery last for approx. 5 hours of continuous scanning.
If the scanner is on, but idle, it will last for much longer than that.
Tip: The scanner can also be used whilst charging.
Comments
0 comments
Article is closed for comments.